GuideConnectivity
What to check during an internet installation
By Inara Crest Engineering 1 min read
Router placement, cable routes, tests, security settings and paperwork — a checklist for when the installer visits.
A careful installation avoids months of frustration. Use this checklist when your internet is installed.
1. Agree the router location
Choose a central, open position near where most devices are used — not in a cupboard or at the far end of the building.
2. Check the cable route
Cables should be neat, protected and clear of doors, windows and foot traffic.
3. Test on a cable
Ask the installer to run a speed test with a computer connected by cable.
4. Test Wi-Fi where it matters
Check signal and speed in the rooms you use most. Discuss additional access points if coverage is weak.
5. Secure the router
Change the default Wi-Fi name, Wi-Fi password and administrator password before the installer leaves.
6. Collect the details
Account number, plan details, support contacts, router model and administrator access.
7. Plan for outages
Consider a small UPS for the router and fibre terminal.
See our internet installation services.
About the author
Inara Crest Engineering
Engineering team
Written by the Inara Crest Technologies engineering team, who design, install and support software, network, security, power and data centre systems for organisations in Kenya and East Africa.